Meta Analitik

Ürün Bilgisi

LABINDIA Pico İletkenlik Ölçer

LABINDIA, ister rutin ister Ar-Ge düzeyinde olsun, laboratuvarlardaki ölçümler için mükemmel bir masaüstü iletkenlik ölçer seçeneği sunar. Kullanıcı tarafından seçilen sıcaklık fonksiyonu sayesinde cihaz, lineer fonksiyon ile 25 +/- 0.1°C referans sıcaklığında iletkenliği hesaplar.

Temel parametreleri gösteren 20 x 2 satır arkadan aydınlatmalı LCD ekran bulunmaktadır. Daha hızlı ölçüm için otomatik aralık seçimi ve standart çözümle hücre sabitinin otomatik değerlendirmesi Pico iletkenlik ölçerde mevcuttur. Labindia İletkenlik ölçer, özel TEMPCO anahtarı aracılığıyla otomatik sıcaklık kompanzasyonu için kullanıcı tarafından seçilebilen bir sıcaklık katsayısına sahiptir.

Common Features

• Advanced microcontroller based user friendly state-of-the-art design.

• PICO pH Meter complies to USP and DIN standards.

• Sleek moulded cabinet with alphanumeric splash waterproof

polyester keyboard with soft keys.

• User interactive software in dialogue mode for ease of operation with

protection against invalid entries.

• 20 x 2 line back lighted LCD display.

• Simultaneous measurement of pH, mV and temperature.

Conductivity, TDS & Salinity optional.

• Non- volatile memory storage of :

a) 40 pH and 40 mV readings with temperature in pre-selected GLP

or Non-GLP format.

b) 24 data memory readings of pH, temperature and time in data

logging mode (optional).

• Password protection for calibration data and stored Readings.

• Calibration data with date and time stamp for authentication.

Facility to view the calibration data.

• Calibration reminder alarm.

• Alphanumeric entries of sample name, identification number

for authentication.

• Input stability indicator for reproducible results.

• Built-in real time clock (RTC) for time display and on report printout.

• Factory entered CUSTOMER NAME on report printout

for authentication.

• Error indication helps the user to trace the problem.

• Audible beep indication during valid key operation.

• PC compatibility for data downloading (optional)

• Combined pH and conductivity instrument is available.

pH Meter

• Automatic temperature compensation by Pt.100 temperature sensor.

Range 0° to 150°C.

• 3 point (Isopotential) or 5 point (linear or segmented)

calibration protocol.

Conductivity Meter

• Automatic evaluation of CELL constant with standard solution.

• User selectable temperature coefficient for automatic temperature

compensation, through special TEMPCO key.

• Input stability indicator for reproducible results.

Specifications

Common Specifications

Temperature

Temperature range 0 to 150°C

Resolution 0.1°C

Relative accuracy +/- 0.2°C

Sensor RTD Pt100

Temp. Compensation Automatic / Manual

Display 20 x 2 line back-lit LCD Display

Keyboard Alphanumeric splash water-proof polyester soft keys.

Output

a) Printer Parallel Port

b) RS 232C PC connectivity

Environmental Operating Conditions

a) Operation Indoor

b) Temperature Ambient to 45° C

c) Relative humidity 5 to 90% non-condensing

Power Requirement 230 Vac, +_10% / 50Hz., 10 W

Dimensions 305 x 220 x 70mm (W x D x H)

Weight 2.2 kgs

pH Meter Specifications

pH range -2.00 to 19.999

Resolution 0.1/ 0.01/ 0.001 pH

Relative Accuracy +/- 0.002 pH

Slope 3 points 80% to 120%, 5 points 90% to 105%

Sensor Combination pH electrode

Calibration Auto-calibration & printout of calibration Report.

millivolt

mV range 0 to +/- 1999.9 mV

Resolution +/- 0.1 mV

Relative accuracy +/- 0.2 mV

Input 1 BNC, 1 Banana, 1 ATC - PT 100

Input Impedance > 10 ohms

Report format (a) Report of selected pH & mV reading with temperature.

(b) Calibration report

Conductivity Meter Specifications

Conductivity Measuring

Range Autoranging 0.01µS/cm to 199.9 mS/cm. (Depending on

the cell used 0.1/1.0/10.K)

Resolution 0.01 (displayed)

Accuracy 0.5%

Input 2 - Banana socket for conductivity electrode,

1-ATC-PT100

Report format (a) Calibration report

(b) Report of all selected Conductivity,TDS &

Salinity readings